FSX Fuji T_7 Trainer
The Fuji KM-2 Trainer was a development of the Beech T-34 Mentor. Japan licensed and built the T-3 version of the T-34 Mentor aircraft, and also built a four-seat liaison version (LM-1/LM-2), often informally referred to as the "Fuji." The T-5 is the primary trainer of the Japan Maritime Self-Defense Force), and the T-7 is the primary trainer of the Japan Air Self-Defense Force.
The Fuji T-5 is an improved T-3 with an Allison 250-B17D turboprop engine. A total of 58 Fuji T-5 trainers have been built, and the type forms the mainstay equipment of the Ozuki-based 201st Naval Air Training Squadron. The first flight of the primary trainer aircraft first unit for the Maritime Self-Defense Force pilot training was April 27, 1988. The turboprop of the engine based on the T-3, have been deployed to the Maritime Self-Defense Force from 1988 as a successor to the KM-2 is a T-5. It has become an innovative aircraft arranged windshield of the large flight control system, and have a secure sight.
In the 1990s the Defense Agency planned to procure primary training aircraft for the Air Self-Defense Force. The newly planned aircraft model was to replace the T-3 primary trainer. In 1998, the T-7, developed by Fuji Heavy Industries Ltd. (FHI), was adopted. 
The first of 67 Fuji T-7 primary trainers, powered by the Model 250-B17F, was delivered to the Japanese Air Self-Defense Force in 2002. The Fuji T-7 is used for basic flight training by the Air Training Command and the Air Development and Test Command of the JASDF. The aircraft are currently operated by the 11th Flying Training Wing, 13th Flying Training Wing and Air Development and Test Wing. 

Effects
--------
-Canopy and cowl flaps open by the standard keys.
-On startup there is automatic engine smoke.
-Wing vortex effect appears by default at 2.5g or quick roll rate.


Installation:
==============
-Unzip " Fuji_T7" into a temporary file and move the "Fuji_T7" folder into the main Aircraft directory.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-Read instructions carefully when installing the gauges ,  say YES...when asked if the gauges sources should be trusted. If you say no....most of the gauges are not going to work !
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-Copy all gauges in the flightsim gauges folder.




CREDITS
=======
Special thanks to : 
-GMAX for the drawing program and Microsoft for their makmdls.mdk.
-Atsushi Terui for the original FS2002 model.

LEGAL:
======
The project is released as freeware.  You may modify it and repaint it. You may upload this file to another website as long as it is not for profit.  
You need the written permission of the original authors to use any of these files for commercial purposes, otherwise a simple credit would be nice. Non commercial repaints-remakes are  welcome but I would appreciate very much receiving a copy of your model.
This file should not cause any problems with your computer, but I accept no responsibility if you think it does


Happy Landings!


A.F.Scrub
January 2015
Email:  af_scrubbypc@hotmail.com